If I were sourcing pipe for a greenhouse heating system, I would not select a supplier based on material name alone. I would first confirm the pipe’s multilayer construction, oxygen-barrier performance, temperature and pressure ratings, dimensional options, installation method, and supplier support. PE-RT (EVOH) pipe can be a practical choice for hydronic greenhouse heating because PE-RT provides flexibility and heat resistance, while the EVOH layer is designed to limit oxygen permeation into the heating circuit. The final selection must still match the water temperature, system pressure, layout, connection method, and local technical requirements.
You can find more information on our web, so please take a look.
I prepared this guide for greenhouse owners, agricultural contractors, heating-system integrators, distributors, and engineering procurement teams. It is especially relevant when the project requires under-bench heating, perimeter heating, root-zone heating, or other low-temperature hydronic applications. It can also help buyers compare PE-RT (EVOH) pipes suppliers before requesting samples, technical documents, and quotations.
The information is intended for supplier screening and preliminary specification. A qualified heating designer should confirm heat-load calculations, pipe spacing, hydraulic balance, pump selection, expansion control, and operating limits before installation. Product ratings should always be checked against the manufacturer’s current technical documentation.
PE-RT is a polyethylene material engineered for elevated-temperature applications. In an EVOH-barrier pipe, the EVOH layer is incorporated into a multilayer structure, usually between protective polymer layers. This barrier is important because oxygen entering a closed hydronic system can contribute to corrosion of metallic components such as boilers, pumps, valves, and heat exchangers.
For greenhouse heating, the pipe carries warm water through circuits positioned beneath benches, along growing rows, near perimeter walls, or in other heat-delivery zones. The pipe must transfer heat consistently while tolerating installation bends, thermal cycling, and the mechanical demands of agricultural environments. PE-RT (EVOH) pipe is therefore considered as part of a complete heating system rather than as an isolated plastic tube.
Not every PE-RT (EVOH) pipe has the same construction. I recommend asking whether the product is a single-layer pipe, a multilayer oxygen-barrier pipe, or a system with an adhesive layer between the PE-RT and EVOH components. The number of layers, material grades, bonding method, wall thickness, and outer protective layer can affect flexibility, oxygen resistance, installation behavior, and long-term suitability.
Buyers should also distinguish between pipe intended for floor or surface heating and pipe intended for potable water, industrial service, or temporary agricultural use. These categories may have different performance requirements and documentation. A supplier should clearly identify the intended application, applicable standards, pressure class, temperature range, and connection recommendations.
Greenhouse heating systems frequently use small and medium pipe dimensions, depending on circuit length, flow rate, heat output, and manifold design. For example, 16 mm, 20 mm, and 25 mm outside-diameter formats may be considered during system planning, but the correct size cannot be selected from diameter alone. Wall thickness, internal diameter, circuit length, pump capacity, and allowable pressure loss must also be evaluated.
I would request the full dimensional specification rather than relying on a nominal size. The supplier should provide outside diameter, wall thickness, tolerance, weight per meter, coil length or straight-length options, minimum bending guidance, and recommended fittings. These details help the contractor calculate material quantities and determine whether the pipe can be installed efficiently in the greenhouse.
My first step is to request a technical data sheet and installation guide. These documents should identify the PE-RT material designation, EVOH barrier structure, dimensions, temperature and pressure ratings, test conditions, storage requirements, and recommended joining method. If a supplier references a standard such as DIN 4726 or another applicable requirement, I would ask for the relevant declaration or test documentation rather than assuming compliance.
I also check whether the stated rating applies continuously, intermittently, or only under a specific pressure-temperature relationship. A pipe rated for a particular temperature may have a different allowable pressure at that temperature. Clear documentation is more useful than a broad marketing statement such as “high temperature” or “long service life.”
Goto HTIAN to know more.
The pipe should be selected after the heating designer defines the water temperature, target heat output, circuit arrangement, and expected flow. In some greenhouse projects, a loop spacing of approximately 20–40 cm may be reviewed for low-level or growing-zone heating, but spacing must be calculated according to crop requirements, insulation, climate, heat source, and floor or bench construction. I would never treat a spacing range as a universal installation rule.
Pipe length also affects hydraulic performance. Longer circuits may increase pressure loss and create uneven heat distribution if the system is not balanced correctly. The supplier can support material selection, but the project engineer or installer should confirm manifold layout, loop length, pump duty, air removal, and balancing requirements.
When comparing suppliers, I look for evidence of controlled extrusion, dimensional inspection, raw-material traceability, barrier-layer inspection, and batch identification. A professional supplier should be able to explain how it controls wall thickness, ovality, layer adhesion, surface quality, and coil packaging. I also ask how nonconforming products are handled and whether inspection records can be provided for the requested batch.
I do not assume that an attractive price indicates poor quality, or that a higher price automatically indicates better performance. Instead, I compare the documented specification, manufacturing consistency, packaging, warranty terms, technical response, and ability to support the actual project. A supplier’s willingness to answer detailed questions is a useful part of the purchasing evaluation.
| Evaluation Area | Questions to Ask the Supplier |
|---|---|
| Construction | How many layers does the pipe have, and where is the EVOH layer positioned? |
| Performance | What are the pressure-temperature ratings and test conditions? |
| Dimensions | What are the available sizes, wall thicknesses, tolerances, and coil lengths? |
| Installation | Which fittings, tools, bending radius, and connection methods are recommended? |
| Documentation | Can the supplier provide technical sheets, declarations, batch information, and inspection records? |
| Commercial Terms | What are the MOQ, production lead time, packaging method, and replacement policy? |
The delivered cost of PE-RT (EVOH) pipe includes more than the price per meter. I also calculate fittings, manifolds, packaging, freight, customs charges, installation tools, and possible losses caused by unsuitable coil lengths. A lower unit price may not be economical if the pipe has limited size availability or requires special fittings that are difficult to source locally.
MOQ and lead time vary by size, color, packaging, tooling, and customization. For a new project, I normally request a quotation for the estimated quantity, a smaller sample or trial order where available, and a separate price for repeat production. I also ask the supplier to state whether the quoted lead time begins after technical approval, deposit receipt, or final artwork confirmation.
For international agricultural projects, packaging deserves special attention. Coils should be protected from crushing, excessive ultraviolet exposure, contamination, and moisture during transportation and storage. The buyer should confirm coil labeling, pallet dimensions, loading quantity, and storage instructions before placing a large order.
As an agricultural pipe manufacturer and supplier, HTIAN can discuss PE-RT (EVOH) pipe requirements according to greenhouse application, target dimensions, packaging needs, and project quantity. We can help organize the information needed for a quotation, including pipe size, wall thickness, coil length, color, fitting requirements, destination market, and expected annual demand. Product availability and technical parameters should be confirmed for each specific order.
For supplier evaluation, I recommend sending HTIAN a project brief rather than requesting only a generic catalog. Include the greenhouse area, heating method, heat-source temperature, estimated circuit layout, required quantity, installation environment, and applicable market requirements. This allows the commercial and technical teams to respond with a more relevant proposal and identify questions before production.
The best PE-RT (EVOH) pipes supplier for a greenhouse heating system is the one that can document the pipe construction, match the product to the system design, provide suitable dimensions and fittings, and support consistent project delivery. I would begin with the heating design, confirm the pressure-temperature requirements, compare technical documents, and then review samples, packaging, commercial terms, and production capability.
For your next step, prepare the required pipe size, wall thickness, coil length, estimated quantity, heating application, destination, and project schedule. Send these details to HTIAN for a targeted quotation and technical discussion. This process gives buyers a clearer basis for comparing suppliers and selecting a PE-RT (EVOH) solution that fits the greenhouse heating project rather than relying on material labels or price alone.
Are you interested in learning more about PE-RT（EVOH） Pipes Suppliers? Contact us today to secure an expert consultation!