A fire fighting lance directs water or another compatible extinguishing medium from a hose toward a fire. The right choice depends on the fire risk, water supply, hose and pump capacity, required spray pattern, and working environment. Common options include smooth-bore lances, selectable-pattern nozzles, and foam-compatible models; each has different operating requirements. In this guide, we explain how to compare these types and what B2B buyers should confirm before placing an order.
This guide is for agricultural equipment distributors, farm and estate managers, equipment manufacturers, and other commercial buyers evaluating a fire fighting lance. It is intended to support product selection and supplier discussions, not to replace a fire risk assessment or local fire-service guidance. Requirements can differ by country, site, and intended use, so confirm applicable regulations and operating procedures before procurement.
A lance is one part of a complete water-delivery system. Its performance depends on the pump, hose, fittings, water source, and operating pressure as well as the lance itself. A suitable model must connect correctly and work within the limits of the rest of the system.
A fire fighting lance, often described as a fire hose nozzle or fire fighting nozzle, controls the discharge at the end of a hose. Depending on its design, it may open or shut off the flow, shape the stream, or change between spray patterns. These functions can help an operator direct water toward a target, but they do not increase the capacity of an undersized pump or water supply.
When comparing product specifications, check that the units and measurement points are clear. For reference, 1 bar equals 100 kPa, 1 inch equals 25.4 mm, and 1 L/min equals 0.06 m³/h. These are unit conversions, not recommended operating values; use the actual pressure, flow, and connection requirements specified for your equipment.
A smooth-bore lance has a relatively simple outlet that produces a concentrated stream. Buyers may consider this design when a direct jet is needed and the pump can support the required flow and pressure. Confirm the outlet diameter and system compatibility rather than assuming that a larger opening will improve performance.
A selectable-pattern model allows the operator to adjust the discharge, commonly between a straighter stream and a wider spray. The adjustment mechanism and available settings vary by product, so ask the supplier for the specific pattern options and operating instructions. A spray pattern can affect coverage and reach, and the appropriate balance depends on the task and site conditions.
Some lances are designed to work with compatible foam equipment or include a shut-off control. These features are useful only when the rest of the system supports them and the selected extinguishing agent is appropriate for the hazard. Verify compatibility with the foam proportioning equipment, hose connections, and operating procedure before ordering.
Product materials may include metals or engineered polymers, depending on the model and intended environment. Compare corrosion resistance, impact exposure, operating temperature limits, maintenance needs, and the manufacturer’s material information. Avoid choosing by material name alone: construction details, component quality, and service conditions also matter.
| Specification | What to confirm |
|---|---|
| Working pressure | Rated operating range and compatibility with the pump and hose |
| Flow rate | Specified flow at the stated pressure and the available water supply |
| Inlet and fittings | Connection type, size, thread or coupling standard, and any adapter needs |
| Pattern and controls | Available discharge settings, shut-off function, and operating method |
| Construction | Materials, maintenance guidance, and suitability for the expected environment |
Agricultural properties may need to consider buildings, machinery, stored materials, outdoor areas, and access to water as separate parts of their fire preparedness plan. The hazards and suitable extinguishing methods differ, so a lance should be selected as part of a system designed for the specific site. For example, a long hose route, limited water supply, or exposed outdoor storage can change which specifications matter most.
You will get efficient and thoughtful service from Kobold.
For a fixed installation, confirm that the lance and hose can reach the intended operating area and connect to the installed system. For mobile equipment, consider storage, handling, coupling compatibility, and how the operator will control the discharge. Where foam is being considered, verify that the nozzle and supporting equipment are designed for the intended agent and application.
Start by documenting the hazards, operating location, expected users, and whether the lance is for a fixed or mobile setup. Identify any site-specific procedures or local requirements that apply. If the lance will be used in a regulated fire protection system, involve a qualified fire safety professional in the selection.
Record the pump’s operating pressure and available flow, then compare them with the lance specifications. Check the hose diameter, connection standard, and any adapters needed to join the components. Ask the supplier to clarify whether stated performance figures apply at a particular pressure or configuration.
Decide whether the application requires a straight stream, adjustable pattern, shut-off function, or foam compatibility. Consider how the intended operator will use the controls and what maintenance or training the design requires. Do not select a feature solely because it is available; connect each option to a documented operational need.
Compare the product’s weight, grip, control layout, cleaning requirements, and instructions for inspection. Ask how replacement parts are identified and whether maintenance information is supplied with the order. A lance that is difficult to inspect or operate may not be a practical fit, even if its headline specifications appear suitable.
There is no single price or lead time that applies to every fire fighting lance. Cost can vary with design, materials, connection standards, order quantity, packaging, and any requested configuration. Minimum order quantity and production timing should be confirmed directly with the supplier for the selected model and destination.
For a useful quotation, provide the intended application, required quantity, target pressure and flow, inlet and coupling details, preferred pattern, and delivery location. If the lance must connect to existing equipment, share drawings or clear photographs of the connections where possible. This information helps the supplier identify compatibility questions before commercial terms are finalized.
When comparing suppliers, assess how clearly they explain specifications and product limitations. Request a current product datasheet, installation or operating instructions, material details, and the available connection options. Confirm what quality documents are supplied with the product, and independently verify any certification or compliance claim against the relevant document and requirement.
The right fire fighting lance is the one that matches the application and works within the limits of the complete hose-and-pump system. Compare smooth-bore, selectable-pattern, and foam-compatible options against actual operating needs, then verify pressure, flow, fittings, materials, and maintenance requirements. Treat unit conversions as a way to compare specifications, not as a substitute for the equipment manufacturer’s ratings or site-specific safety advice.
Before requesting a quotation, prepare your system specifications, connection details, quantity, and delivery destination. Kobold supports B2B buyers evaluating fire fighting lance options and can discuss product specifications, sourcing requirements, and fit with agricultural equipment applications. Contact our team with your requirements to review a suitable configuration and confirm current pricing, MOQ, and lead time.
The company is the world’s best Fire Fighting Lance supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.